CLEARING DTC [REAR POWER SEAT CONTROL MODULE (LH)]

id0902t2960400

CMDTC Self TEST

1.  Connect the M-MDS to the DLC-2.

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

(1)  Select “Self Test”.

(2)  Select “All CMDTCs”.

3.  Verify the DTC according to the directions on the screen.

4.  Press the clear button on the DTC screen to clear the DTC.

5.  Switch the ignition off.

6.  Switch the ignition ON (engine off or on) and wait for 5 s or more.

7.  Perform DTC inspection. (See DTC INSPECTION [REAR POWER SEAT CONTROL MODULE (LH)].)

8.  Verify that no DTCs are displayed.