GPS ANTENNA INSPECTION

id092000822200

Note

•  The integrity of the GPS antenna cannot be determined from a single part. When inspecting the GPS antenna, perform the following procedure.

Type-A

1.  Connect the M-MDS to the DLC-2.

2.  Perform the DTC inspection for the connectivity master unit (CMU) and verify if any DTCs related to the GPS antenna is detected.

(Refer to the DTC INSPECTION [CONNECTIVITY MASTER UNIT (TYPE-A)] in the workshop manual)

•  If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting.

(Refer to the DTC TABLE [CONNECTIVITY MASTER UNIT (TYPE-A)] in the workshop manual)

Type-B

1.  Connect the M-MDS to the DLC-2.

2.  Perform the DTC inspection for the connectivity master unit (CMU) and verify if any DTCs related to the GPS antenna is detected.

(Refer to the DTC INSPECTION [CONNECTIVITY MASTER UNIT (TYPE-B)] in the workshop manual)

•  If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting.

(Refer to the DTC TABLE [CONNECTIVITY MASTER UNIT (TYPE-B)] in the workshop manual)