OIL CONTROL VALVE (OCV) INSPECTION

id011000801400

Coil Resistance Inspection

1.  Measure the resistance between terminals A and B using an ohmmeter.

bpe5ue00000015

•  If it is not within the specification, replace the OCV.

Spool Valve Operation Inspection

1.  Verify that the spool valve in the OCV is in the maximum valve timing advance position as indicated in the figure.

bpe1ze00000100

•  If there is any malfunction, replace the OCV.

Note

•  When applying battery positive voltage between the OCV terminals, the connection can be either of the following:

―  Positive battery cable to terminal A, negative battery cable to terminal B

―  Positive battery cable to terminal B, negative battery cable to terminal A

2.  Apply battery positive voltage between the OCV terminals and verify that the spool valve operates and moves to the maximum valve timing retard position.

bpe5ue00000015

bpe1ze00000101

•  If there is any malfunction, replace the OCV.

3.  Stop applying battery positive voltage and verify that the spool valve returns to the maximum valve timing advance position.

•  If there is any malfunction, replace the OCV.