ELECTRIC POWER STEERING (EPS) MOTOR

id061300245600


Purpose, Function

•  The EPS motor is driven by the control current from the EPS CM (control module) and generates assist torque to manual steering mechanism.

Construction

•  The EPS motor is installed to the steering column with an integrated EPS CM.
•  The EPS motor is a brushless motor which consists of a three-phase star-connected stator, a permanent magnet rotor, and resolver sensor.

Structural view

ac5wzn00000270


Operation

•  Current flows from the EPS CM to the stator to rotate the motor axis which is integrated with the rotor.
•  A resolver sensor for detecting rotation angle is built into the EPS motor and outputs a motor rotation angle signal to the EPS CM.
•  The EPS CM switches the current flowing to each stator based on the rotation angle signal from the resolver sensor.

Fail-safe

DTC No.

Fail-safe function
C200D:1C
•  Control is maintained in the backup control
•  Power steering malfunction indicator light: Illuminates
C200D:64
•  Control disabled
•  Power steering malfunction indicator light: Illuminates
U2011:19
•  Control disabled
•  Power steering malfunction indicator light: Illuminates
U2011:1C
U2011:62
U2011:72
•  Phase 1 open circuit malfunction is detected in the EPS motor
―  Control is maintained in the backup control
•  Other malfunction detected in EPS motor internal circuit
―  Control disabled
•  Power steering malfunction indicator light: Illuminates
U2011:92
•  Control disabled
•  Power steering malfunction indicator light: Illuminates