LIGHTING SYSTEM PERSONALIZATION

id091800013300

•  A personalization feature has been adopted with which settings for each function can be changed.
•  The setting for each function can be switched using the light switch or center display. Refer to the [LIGHTING SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE] in the workshop manual for the detailed setting procedure.

Turn Light System

Display of center display

Function

Initial setting

Setting contents

Control module
3-flash Turn Signal
The turn light system can be switched between operable and inoperable.
On or Off*1
On / Off
Rear body control module (RBCM)
Reset
Returns the setting content of the turn light system to the initial setting.
No
No / Yes
Rear body control module (RBCM)

*1   :The initial value differs depending on the market.

Auto Light System

Display of center display

Function

Initial setting

Setting contents

Control module
Auto Headlight On
Auto light sensor sensitivity can be changed.
Medium
Light / Medium Light / Medium / Medium Dark / Dark
Rear body control module (RBCM)
Reset
Returns the setting content of the lighting system to the initial setting.
No
No / Yes
•  Front body control module (FBCM)
•  Rear body control module (RBCM)
•  Forward sensing camera (FSC)
•  Instrument cluster
•  Adaptive LED headlights control module

Note
•  If the mode is set to [Light] and [Medium Light], the illuminance level for turning on the headlight LO, TNS (parking lights), and panel light increases. Therefore, each light turns on when the ambient light is brighter than when the level is set to [Medium]. In addition, if the mode is set to [Dark] or [Medium Dark], the illuminance level for turning on the headlight LO, TNS, and panel light decreases. Therefore, each light turns on when the ambient light is darker than when the level is set to [Medium].
•  The auto light sensitivity setting turns on/off the headlight LO, TNS (parking lights), and panel light according to the following illumination levels.
Note
•  The following illumination levels are a reference. The illumination levels vary depending on the surrounding conditions (weather, reflection off buildings).

Setting contents

Lights on operation

Lights off operation

Panel light On

Panel light On

Panel light On

Panel light Off

TNS (parking lights) Off

TNS (parking lights) On

TNS (parking lights) Off

TNS (parking lights) Off

Headlight LO Off

Headlight LO On

Headlight LO Off

Headlight LO Off
Light
1,000 lux
4,000 lux
8,000 lux
2,000 lux
Medium Light
850 lux
3,000 lux
6,000 lux
1,700 lux
Medium
700 lux
2,000 lux
4,000 lux
1,400 lux
Medium Dark
550 lux
1,000 lux
2,000 lux
1,100 lux
Dark
400 lux
500 lux
1,000 lux
800 lux


Coming Home Light

Display of center display

Function

Initial setting

Setting contents

Control module
Coming Home Light
The coming home light system operation time can be switched.
30 seconds
120 seconds / 90 seconds / 60 seconds / 30 seconds / Off
Rear body control module (RBCM)
Reset
Returns the setting content of the lighting system to the initial setting.
No
No / Yes
•  Front body control module (FBCM)
•  Rear body control module (RBCM)
•  Forward sensing camera (FSC)
•  Instrument cluster
•  Adaptive LED headlights control module


Leaving Home Light

Display of center display

Function

Initial setting

Setting contents

Control module
Leaving Home Light
The leaving home light can be switched between operable and inoperable.
On or Off*1
On / Off
Rear body control module (RBCM)
Reset
Returns the setting content of the lighting system to the initial setting.
No
No / Yes
•  Front body control module (FBCM)
•  Rear body control module (RBCM)
•  Forward sensing camera (FSC)
•  Instrument cluster
•  Adaptive LED headlights control module

*1   :The initial value differs depending on the market.

Room Light Control System

Display of center display

Function

Initial setting

Setting contents

Control module
Interior Light Timeout - Door Open
•  The front/rear map light illumination time after any door is opened can be changed.
•  The cargo compartment light illumination time after the trunk lid is opened can be changed.
30 minutes
60 minutes / 30 minutes / 10 minutes
Rear body control module (RBCM)
Interior Light Timeout - Door Closed
The front/rear map light illumination time after all the doors are closed can be changed.
15 seconds
60 seconds / 30 seconds / 15 seconds / 7.5 seconds
Rear body control module (RBCM)
Interior Lightning Brightness
The ambient light brightness can be changed when the TNS (parking lights) are turned on.
Medium
Bright / Medium / Dark / Off
Rear body control module (RBCM)
Reset
Returns the setting content of the lighting system to the initial setting.
No
No / Yes
•  Front body control module (FBCM)
•  Rear body control module (RBCM)
•  Forward sensing camera (FSC)
•  Instrument cluster
•  Adaptive LED headlights control module


Running Light System (General (L.H.D. R.H.D.), Australian Specs.)


Using light switch

Note
•  Refer to the workshop manual for the detailed setting procedure.

Function

Initial setting

Setting contents

Control module
The running light system function can be set.
ON (running light illumination)
Off (running light (DRL) non-illumination)/On (daytime running light (DRL) illumination)
Front body control module (FBCM)


Using center display

Display of center display

Function

Initial setting

Setting contents

Control module
Daytime Running Lights
The running light system function can be set.
On
On / Off
Front body control module (RBCM)
Reset
Returns the setting content of the lighting system to the initial setting.
No
No / Yes
•  Front body control module (FBCM)
•  Rear body control module (RBCM)
•  Forward sensing camera (FSC)
•  Instrument cluster
•  Adaptive LED headlights control module