INSTRUMENTATION/DRIVER INFO. PERSONALIZATION

id092200018400

Caution
•  The personalization feature may not be set correctly if [Not Adopted.] is selected in the setting displayed on the Mazda Modular Diagnostic System (M-MDS). Do not select [Not Adopted.] in the setting displayed on the Mazda Modular Diagnostic System (M-MDS).
Note
•  Settings of some personalization features displayed on the Mazda Modular Diagnostic System (M-MDS) cannot be changed depending on the vehicle specification.
•  A personalization feature has been adopted which enables the instrument cluster settings to be changed.
•  The setting for each function can be switched using the Mazda Modular Diagnostic System (M-MDS) or center display. Refer to the [INSTRUMENT CLUSTER PERSONALIZATION FEATURES SETTING PROCEDURE] in the workshop manual for the detailed setting procedure.

Turn and Hazard Indicator Alarm


Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control unit
Turn Signal Volume.
The volume of the turn and hazard indicator alarm can be changed.
High
Low / High
Instrument cluster


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit
Turn Signal Volume
The volume of the turn and hazard indicator alarm can be changed.
High
High / Low
Rear body control module (RBCM)
Reset
Returns the setting content of the turn light system to the initial setting.
No
No / Yes
Rear body control module (RBCM)


Lights-on Reminder Warning Alarm


Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control unit
Lights-on Reminder Volume.
The volume for the lights-on reminder warning alarm can be changed.
OFF / Low / High*1
OFF / Low / High
Instrument cluster


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit
Light On Reminder Vol
The volume for the lights-on reminder warning alarm can be changed.
High
High / Low / Off
Instrument cluster
Reset
Returns the setting content of the lighting system to the initial setting.
No
No / Yes
•  Front body control module (FBCM)
•  Rear body control module (RBCM)
•  Forward sensing camera (FSC)
•  Instrument cluster
•  Adaptive LED headlights control module
•  Adaptive front lighting system (AFS) control module

*1   :The initial value differs depending on the market.


Temperature


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit
Temp*1
The temperature unit can be changed.
°F or °C*2
°F /°C
Instrument cluster

*1   :When the ambient temperature display is switched, the set A/C cabin temperature display is also changed.
*2   :The initial value differs depending on the market.

Distance


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit
Distance
The distance unit can be changed.
Miles or km*1
Miles / km
Instrument cluster

*1   :The initial value differs depending on the market.


Parking sensor system (VIN serial No. 200001—/500001—)


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit
Parking sensor indication
The operation of parking sensor system can be turned off.
On
On / Off
Parking assist unit (ultrasonic)


Active driving display


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit
Active Driving Display
Setting can be changed so that the active driving display is not displayed.
On
On / Off
Instrument cluster
Height
The display height (up/down position) can be changed.
0
13 steps up/down from initial setting (total: 27steps)
Instrument cluster
Brightness Control
The method for adjusting the display brightness (automatically/manually) can be changed.
AUTO
AUTO / MANUAL
Instrument cluster
Brightness
The standard brightness with the automatic brightness adjustment can be changed.
0
2 steps up / down from initial setting (total: 5 steps)
Instrument cluster
The standard brightness with the manual brightness adjustment can be changed.
0
20 steps up / down from initial setting (total: 41 steps)
Instrument cluster
Rotate
The tilt of the displayed image can be adjusted.
0
3 steps up / down from initial setting (total: 7 steps)
Instrument cluster
Navigation system guidance
Setting can be changed so that the navigation system guidance is not displayed.
On
On / Off
Instrument cluster