BRACE REINFORCEMENT INSTALLATION [PANEL REPLACEMENT]

id098008632100

Symbol Mark

ac9uub00000139

Installation Procedure

1.  When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.

2.  Drill holes for the plug welding before installing new parts.

3.  After temporarily installing new parts, make sure the related parts fit properly.

4.  Plug weld the 14 locations indicated by (A) shown in the figure.

5.  Arc weld (spot weld) the 2 locations indicated by (B) from the room side shown in the figure, then install the brace reinforcement.

ac9uub00000179