REAR END PANEL REMOVAL [PANEL REPLACEMENT]

id098008744500

Symbol Mark

ac9uub00000126

Removal Procedure

1.  Drill the 22 locations indicated by (A) shown in the figure, then open the end of rear fender panel (lower).

ac9uub00000127

2.  Drill the 14 locations indicated by (B) shown in the figure.

ac9uub00000128

3.  Drill the 2 locations indicated by (C) from the room side shown in the figure.

4.  Grind the 8 locations indicated by (D) from the room side shown in the figure.

5.  Drill the 41 locations indicated by (E) shown in the figure.

ac9uub00000129

6.  After lowering the rear end panel in the direction of arrow (1) shown in the figure, pull it out in the direction of arrow (2).

ac9uub00000130