FRONT FRAME (REAR) COMPONENT REMOVAL [PANEL REPLACEMENT]

id098008752600

Symbol Mark

am6zzb00000375

Removal Procedure

1.  Drill the 14 locations indicated by (A) from the room side shown in the figure.

ac9wzb00000160

2.  Drill the 55 locations (LH), 54 locations (RH) indicated by (B) shown in the figure.

3.  Drill the 11 locations indicated by (C) shown in the figure.

Note

•  When drilling the 11 locations indicated by (C) shown in the figure, do not drill a hole all the way through or there could be a problem when installing the new part.

ac9wzb00000140

4.  Remove the front frame (rear) component.