FRONT FRAME (REAR) COMPONENT INSTALLATION [PANEL REPLACEMENT]

id098008752700

Symbol Mark

ac9wzb00000174

Installation Procedure

1.  When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.

2.  Drill holes for the plug welding before installing the new parts.

3.  After temporarily installing new parts, make sure the related parts fit properly.

4.  Plug weld the 14 locations indicated by (A) from the room side shown in the figure

ac9wzb00000168

5.  Plug weld the 66 locations (LH), 65 locations (RH) indicated by (B) shown in the figure, then install the front frame (rear) component.

ac9wzb00000141