NO.3 i-stop INDICATOR LIGHT (GREEN) FLASHES [SKYACTIV-G 2.5T]

id1103b2000800

VIN Serial No. TC*# 100001—400000/ TB*# 100001—700000

3

i-stop INDICATOR LIGHT (GREEN) FLASHES

DESCRIPTION

•  i-stop indicator light (green) remains flashing during idling.

•  i-stop indicator light (green) remains flashing during i-stop.

POSSIBLE CAUSE

Note

•  If the brake pedal depression is insufficient, the i-stop indicator light (green) illuminates and the i-stop function operates by increasing brake pedal depression.

i-stop function operation conditions are not set

•  False detection of insufficient brake depression (fluid pressure).

―  Brake fluid pressure sensor (built-into DSC HU/CM) malfunction

3	i-stop INDICATOR LIGHT (GREEN) FLASHES
DESCRIPTION	• i-stop indicator light (green) remains flashing during idling. • i-stop indicator light (green) remains flashing during i-stop.
POSSIBLE CAUSE	Note • If the brake pedal depression is insufficient, the i-stop indicator light (green) illuminates and the i-stop function operates by increasing brake pedal depression. i-stop function operation conditions are not set • False detection of insufficient brake depression (fluid pressure). ― Brake fluid pressure sensor (built-into DSC HU/CM) malfunction

Diagnostic Procedure

STEP	INSPECTION	RESULTS	ACTION
1	VERIFY DTC • Retrieve the PCM and DSC HU/CM DTCs using the M-MDS. (See ON-BOARD DIAGNOSTIC TEST [PCM (SKYACTIV-G 2.5T)].) (See DTC INSPECTION [DSC HU/CM].) • Are any DTCs present?	Yes	Go to the applicable DTC inspection. (See DTC TABLE [PCM (SKYACTIV-G 2.5T)].) (See DTC TABLE [DSC HU/CM].)
1		No	Go to the next step.
2	INSPECT BRAKE FLUID PRESSURE SENSOR • Inspect the brake fluid pressure sensor. (See BRAKE FLUID PRESSURE SENSOR INSPECTION.) • Is there any malfunction?	Yes	Replace the DSC HU/CM, then go to the next step. (See DSC HU/CM REMOVAL/INSTALLATION.)
2		No	Repeat the inspection from Step 1. • If the malfunction is not resolved, replace the PCM. (See PCM REMOVAL/INSTALLATION [SKYACTIV-G 2.5T].) Go to the next step.
3	Verify the test results. • If normal, return to the diagnostic index to service any additional symptoms. (See SYMPTOM DIAGNOSTIC INDEX [SKYACTIV-G 2.5T].) • If a malfunction remains, inspect the related Service Information and perform the repair or diagnosis. ― If the vehicle is repaired, troubleshooting is completed. ― If the vehicle is not repaired or additional diagnostic information is not available, replace the PCM. (See PCM REMOVAL/INSTALLATION [SKYACTIV-G 2.5T].)

VIN Serial No. TC*# 400001—/ TB*# 700001—

3

i-stop INDICATOR LIGHT (GREEN) FLASHES

DESCRIPTION

• i-stop indicator light (green) remains flashing during i-stop.

POSSIBLE CAUSE

• If the driver’s door is open while i-stop is operating, the i-stop warning light (green) flashes continuously.

3	i-stop INDICATOR LIGHT (GREEN) FLASHES
DESCRIPTION	• i-stop indicator light (green) remains flashing during i-stop.
POSSIBLE CAUSE	• If the driver’s door is open while i-stop is operating, the i-stop warning light (green) flashes continuously.

Diagnostic Procedure

STEP	INSPECTION	RESULTS	ACTION
1	VERIFY DTC • Retrieve the PCM and DSC HU/CM DTCs using the M-MDS. (See ON-BOARD DIAGNOSTIC TEST [PCM (SKYACTIV-G 2.5T)].) (See DTC INSPECTION [DSC HU/CM].) • Are any DTCs present?	Yes	Go to the applicable DTC inspection. (See DTC TABLE [PCM (SKYACTIV-G 2.5T)].) (See DTC TABLE [DSC HU/CM].)
1		No	Go to the next step.
2	Verify the test results. • If normal, return to the diagnostic index to service any additional symptoms. (See SYMPTOM DIAGNOSTIC INDEX [SKYACTIV-G 2.5T].) • If a malfunction remains, inspect the related Service Information and perform the repair or diagnosis. ― If the vehicle is repaired, troubleshooting is completed. ― If the vehicle is not repaired or additional diagnostic information is not available, replace the PCM. (See PCM REMOVAL/INSTALLATION [SKYACTIV-G 2.5T].)