REAR PLANETARY GEAR INSPECTION

id051700501300

Note

• Measure at different places and take an average.

1. Using a dial indicator, measure the inner diameter of the rear planetary gear bushings.

bawuua00000519

Rear planetary gear bushing inner diameter

Front side: 33.26 — 33.286 mm {1.3095 — 1.3104 in}

Rear side: 33.26 — 33.286 mm {1.3095 — 1.3104 in}

• If it exceeds the specification, replace the rear planetary gear component with a new one.

• When the rear planetary gear component is replaced, inspect the contact surface opposed to the planetary sun gear.

• If the surface of it is scratched or has changed color, replace the planetary sun gear with a new one.

2. Using a dial indicator, measure the inner diameter of the planetary sun gear bushings.

bawuua00000520

Rear planetary sun gear bushing inner diameter

Front side: 24.2 — 24.226 mm {0.9528 — 0.9537 in}

Rear side: 24.2 — 24.226 mm {0.9528 — 0.9537 in}

• If it exceeds the specification, replace the planetary sun gear component with a new one.

• When the planetary sun gear component is replaced, inspect the contact surface opposed to the intermediate shaft.

• If the surface of it is scratched or has changed color, replace the intermediate shaft with a new one.