DRIVE BELT AUTO TENSIONER INSPECTION [MZI-3.7]
id0110c5801700
1. Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION [MZI-3.7].)
2. Remove the front wheel and tire (RH). (See GENERAL PROCEDURES (SUSPENSION).)
3. Remove the splash shield (RH).
4. Remove the generator and A/C drive belt. (See DRIVE BELT REMOVAL/INSTALLATION [MZI-3.7].)
5. Verify that the drive belt auto tensioner moves smoothly in the operational direction.
ac9wzw00002214
|
6. Turn the drive belt auto tensioner pulley by hand and verify that it rotates smoothly.
ac9wzw00002215
|
7. Install in the reverse order of removal.