 |
ac9wzw00001668
PURGE SOLENOID VALVE INSPECTION [MZI-3.7]
id0116d2800900
Airflow Inspection
1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZI-3.7].)
2. Disconnect the quick release connector from the purge solenoid valve. (See QUICK RELEASE CONNECTOR (EMISSION SYSTEM) REMOVAL/INSTALLATION [MZI-3.7].)
3. Remove the purge solenoid valve. (See PURGE SOLENOID VALVE REMOVAL/INSTALLATION [MZI-3.7].)
4. Verify that the airflow is as indicated in the table.
PCM connector (2 types)
ac9wzw00001668
|
PCM connector (3 types)
ac9wzw00001558
|
|
Measured condition |
Continuity between A—B |
|---|---|
|
When voltage is not applied between terminals A and B
|
No airflow
|
|
When voltage is applied between terminals A and B
|
Airflow detected
|
