IGNITION COIL REMOVAL/INSTALLATION [MZI-3.7]

id0118c2800200

1.  Disconnect the negative battery cable.

2.  Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION [MZI-3.7].)

3.  Remove the dynamic chamber. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZI-3.7].)

4.  Remove in the order indicated in the table.

Caution

•  Apply small amount of the specified dielectric grease to the inside of the ignition coils, then install the ignition coils to the spark plugs.

―  Specified grease: Motorcraft XG-3A

5.  Install in the reverse order of removal.

ac9wzw00002113

1	Connector
2	Ignition coil