CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION [MZI-3.7]

id0140c3801500

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZI-3.7].)

2.  Remove the battery. (See BATTERY REMOVAL/INSTALLATION [MZI-3.7].)

3.  Remove the following parts for easier access:

•  MAF/IAT sensor connector

•  Vacuum hose (to master back) (See QUICK RELEASE CONNECTOR (EMISSION SYSTEM) REMOVAL/INSTALLATION [MZI-3.7].)

•  Resonance chamber and air cleaner assy (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZI-3.7].)

4.  Disconnect the CMP sensor connector.

5.  Remove the CMP sensor.

ac9wzw00001731

Note

•  Lubricate the CMP O-ring seal with clean engine oil.

6.  Install in the reverse order of removal.