KNOCK SENSOR (KS) INSPECTION [MZI-3.7]

id0140c3802800

Resistance Inspection

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZI-3.7].)

2.  Disconnect the KS connector. (See KNOCK SENSOR (KS) REMOVAL/INSTALLATION [MZI-3.7].)

3.  Measure the resistance between the following terminals:

ac9wzw00001734

•  KS terminals A and B (KS (LH))

•  KS terminals C and D (KS (RH))

―  If not as specified, replace the KS. (See KNOCK SENSOR (KS) REMOVAL/INSTALLATION [MZI-3.7].)