ON-BOARD DIAGNOSTIC SYSTEM PID/DATA MONITOR FUNCTION

id030200108400

•  The parameter identification (PID)/data monitor function is used for optionally selecting input/output signal monitor items preset in the 4-wheel drive (4WD) control module (CM) and reading them out in real-time.

PID/DATA Monitor Table

PID/data monitor item

Input/output part

Unit/Condition

(Tester display)
AAT
Ambient air temperature
°C/°F
APP
Accelerator pedal position
%
BOO
Brake ON/OFF
OFF/ON
COUP_SOL
Coupling solenoid duty cycle
%
OIL_TEMP
Rear differential oil temperature
°C/°F
OIL_TEMP
Rear differential oil temperature
V
VPWR
Ignition voltage
V
WSPD_LF
ABS wheel-speed sensor (LF)
KPH, MPH
WSPD_LR
ABS wheel-speed sensor (LR)
KPH, MPH
WSPD_RF
ABS wheel-speed sensor (RF)
KPH, MPH
WSPD_RR
ABS wheel-speed sensor (RR)
KPH, MPH
4WD_LAMP
4WD mode lamp
OFF/BLINK/ON