DRIVELINE/AXLE TECHNICAL DATA
id035000800100
Front and Rear Axle
|
Item |
Specification |
|---|---|
|
Front wheel bearing maximum play
|
0.05 mm {0.002 in}
|
|
Rear wheel bearing maximum play
|
0.05 mm {0.002 in}
|
Drive Shaft
|
Item |
Specification |
|---|---|
|
Front drive shaft standard length
|
LH: 658.7—668.7 mm {25.92—26.30 in}
RH: 630.7—640.7 mm {24.82—25.20 in}
|
|
Rear drive shaft standard length
|
Crimped-fix locknut type:
LH: 840.3—850.3 mm {33.09—33.47 in}
RH: 895.3—905.3 mm {35.25—35.64 in}
Self-locking nut type:
LH: 842.3—852.3 mm {33.17—33.55 in}
RH: 897.3—907.3 mm {35.33—35.72 in}
|
Differential
|
Item |
Specification |
|---|---|
|
Rear differential oil
|
Specified oil grade: API service GL-5
Specified oil viscosity: SAE 80W-90
Capacity (approx quantity): 1.0 L {1.1 US qt, 0.9 Imp qt}
|
|
Rear differential backlash of pinion gear and side gear
|
0.1 mm {0.004 in} or less
|
|
Rear differential pinion height
|
-0.032—0.032 mm {-0.0012—0.0012 in}
|
|
Rear differential drive pinion preload
|
1.3—1.8 N·m {14—18 kgf·cm, 12—15 in·lbf}
|
|
Rear differential backlash of drive pinion and ring gear
|
Standard: 0.09—0.11 mm {0.003—0.004 in}
Minimum value: 0.05 mm {0.002 in}
|
Propeller Shaft
|
Item |
Specification |
|---|---|
|
Propeller shaft maximum runout
|
0.8 mm {0.031 in}
|
|
Propeller shaft starting torque
|
0.29—1.47 N·m {3.0—14.9 kgf·cm, 2.6—13.0 in·lbf}
|
Transfer
|
Item |
Specification |
|||
|---|---|---|---|---|
|
Transfer oil
|
Type
|
Grade
|
API service GL-5
|
|
|
Viscosity
|
SAE 75W-140
|
|||
|
Oil capacity
(approx. quantity)
|
(L {US qt, Imp qt})
|
0.532 {0.562, 0.468}
|
||