ON-BOARD DIAGNOSTIC SYSTEM ACTIVE COMMAND MODES FUNCTION

id040200110700

•  The active command modes function is used for optionally selecting active command modes items of input/output parts preset in the dynamic stability control (DSC)/roll stability control (RSC) hydraulic unit (HU)/control module (CM), and to operate them regardless of CM control.
•  To protect the hydraulic unit interior, operate output related parts for only 10 s or less when using the active command modes function.

Active Command Modes Table

Command name

Output part name

Operation

Operation condition
PMP_MOTOR
Pump motor
Off/On
Ignition switch at ON
PWR_RLY
Valve relay
SSR_INTL
DSC/RSC sensor
V_LF_INL
LF inlet solenoid valve
V_LF_OTL
LF outlet solenoid valve
V_LR_INL
LR inlet solenoid valve
V_LR_OTL
LR outlet solenoid valve
V_RF_INL
RF inlet solenoid valve
V_RF_OTL
RF outlet solenoid valve
V_RR_INL
RR inlet solenoid valve
V_RR_OTL
RR outlet solenoid valve
V_STB_L
LH stability control solenoid valve
V_STB_R
RH stability control solenoid valve
V_TRC_L
LH traction control solenoid valve
V_TRC_R
RH traction control solenoid valve