AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT [AW6A-EL, AW6AX-EL]


id051723800600

Warning
•  A hot transaxle and ATF can cause severe burns. Turn off the engine and wait until they are cool before replacing the ATF.

1.  Remove the oil dipstick.

2.  Remove the oil drain plug and gasket to drain the ATF into a container.

ac9uuw00001946

3.  Install a new gasket and the drain plug.

Tightening torque
23.5—54.9 N·m {2.4—5.5 kgf·m, 17.4—40.4 ft·lbf}

4.  Add the specified ATF through the oil filler tube until it reaches the lower notch of dipstick.

ATF
Type: JWS3309
Capacity (Approx. quantity): 7.0 L {7.4 US qt, 6.2 lmp qt}

5.  Inspect the ATF level. (SeeAUTOMATIC TRANSAXLE FLUID (ATF) INSPECTION [AW6A-EL, AW6AX-EL])