DTC B1342

id080200801100

DTC

B1342

SAS control module (internal circuit abnormal)

DETECTION CONDITION

Warning

•  Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection with only detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.

•  Malfunction in the SAS control module internal circuit

POSSIBLE CAUSE

•  SAS control module malfunction

DTC	B1342	SAS control module (internal circuit abnormal)
DETECTION CONDITION	Warning • Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection with only detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. • Malfunction in the SAS control module internal circuit
POSSIBLE CAUSE	• SAS control module malfunction

Diagnostic Procedure

STEP	INSPECTION		ACTION
1	PERFORM SAS CONTROL MODULE DTC INSPECTION • Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC.) • Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC DISPLAY.) • Are the same DTCs present?	Yes	Replace the SAS control module.(See SAS CONTROL MODULE REMOVAL/INSTALLATION.)
1		No	DTC troubleshooting completed.