DTC INSPECTION [POSITION MEMORY CONTROL SYSTEM]

id0902z8998200

1.  Connect the M-MDS to the DLC-2.

L.H.D.

ac9uuw00000452

R.H.D.

ac9wzw00000200

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

•  When using the IDS (laptop PC)

1.  Select “Self Test”.

2.  Select “Modules”.

3.  Select “DSM”.

•  When using the PDS (Pocket PC)

1.  Select “Module Tests”.

2.  Select “DSM”.

3.  Select “Self Test”.

3.  Verify the DTC according to the directions on the screen.

•  If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.

4.  After completion of repairs, clear all DTCs stored in the position memory control module. (See CLEARING DTC [POSITION MEMORY CONTROL SYSTEM].)