RECLINER MOTOR INSPECTION

id091300801000

1.  Disconnect the recliner motor connector.

2.  Apply battery positive voltage to the recliner motor terminals and inspect the recliner motor operation

ac9wzw00001245

•  If not as specified, replace the slide adjuster. (See FRONT SEAT SLIDE ADJUSTER REMOVAL/INSTALLATION.)

Motor operation	Connection
	B+	GND
Forward	E	A
Backward	A	E

3.  Connect the recliner motor connector.

4.  Measure the recliner motor terminal C waveform during motor operation using the oscilloscope.

Condition	Voltage (V)
High output	4.8 or more
Low output	1.0 or less