FRONT MAP LIGHT REMOVAL/INSTALLATION

id091800808000

1.  Disconnect the negative battery cable.

2.  Remove the intruder sensor. (with intruder sensor) (See INTRUDER SENSOR REMOVAL/INSTALLATION.)

3.  Remove in the order indicated in the table.

ac9wzw00001784

1	Lens (See Lens Removal Note.)
2	Screw
3	Front map light bulb
4	Front map light
5	Connector

4.  Install in the reverse order of removal.

Lens Removal Note

1.  Insert a tape-wrapped flathead screwdriver into the service hole and pry with the screwdriver in the direction shown by the arrow to remove the lens.

ac9uuw00000791