ENGINE SPECIFICATIONS [MZI-3.7]


id0100d2100300


Specification

Item

Specification

MECHANICAL
Type
Gasoline, 4-cycle
Cylinder arrangement and number
DOHC - 24V 60° V, 6 - cylinder
Combustion chamber
Pentroof
Valve system
DOHC, timing chain driven, 24 valves
Displacement
(ml {cc, cu in})
3,726 {3,726, 227.4}
Bore × stroke
(mm {in})
95.5 × 86.7 {3.75 × 3.41}
Compression ratio
10.3:1
Valve clearance
(mm {in})
IN
0.150—0.250 {0.00591—0.00984}[Engine cold]
EX
0.300—0.400 {0.0119—0.0157}[Engine cold]
LUBRICATION SYSTEM
Type
Force-fed type
Oil pressure (reference value)
[oil temperature: 93.3 °C {200 °F}]
(kPa {kgf/cm2, psi} [rpm])
310—621 {3.17—6.33, 45.0—90.0} [2,000]
Oil pump
Type
Trochoid gear type
Oil cooler
Type
Water-cooled
Oil filter
Type
Full-flow, paper element
Oil capacity (approx. quantity)
Oil replacement
(L {US qt, lmp qt})
4.7 {5.0, 4.1}
Oil and oil filter replacement
(L {US qt, lmp qt})
5.2 {5.5, 4.6}
COOLING SYSTEM
Type
Water-cooled, Electromotive
Coolant capacity (approx. quantity)
(L {US qt, lmp qt})
Single fan control module: 12.9 {13.6, 11.4}
Dual fan control module: 13.3 {14.1, 11.7}
Water pump
Type
Centrifugal, timing chain-driven
Thermostat
Type
Wax, bottom-bypass
Opening temperature
(°C {°F})
79.5—83.3 {175.2—181.9}
Full-open temperature
(°C {°F})
94.5 {202.1}
Full-open lift
(mm {in})
More than 8.1 {0.32}
Radiator
Type
Corrugated fin
Cooling system cap
Cap valve opening pressure
(kPa {kgf/cm2, psi})
93.2—122.6 {0.95—1.25, 13.5—17.8}
Cooling fan
Type
Electric
Number of blades
No.1: 5, No.2: 7
Outer diameter
(mm {in})
360 {14.2}
Fan motor output
(W)
Single fan control module: 160
Dual fan control module: 240
FUEL SYSTEM
Injector
Type
Hi-ohmic
Type of fuel delivery
Top-feed
Type of drive
Voltage
Fuel pump
Type
Electric
Fuel tank
Capacity
(L {US gal, lmp gal})
76.0 {20.1, 16.7}
Fuel
Type
Regular unleaded fuel (Conforming to Fuel Quality Standards Act 2000 (Australia)) 90 or above*
EMISSION SYSTEM
Catalyst
Type
WU-TWC (monolith)
EVAP control system
Type
Charcoal canister type
PCV system
Type
Closed type
CHARGING SYSTEM
Battery
Voltage
(V)
12
Type and capacity
(5-hour rate)
(A·h)
80D26L (55)
Generator
Output
(V-A)
12-110
Regulated voltage
Controlled by PCM
Diagnosis function
IGNITION SYSTEM
Ignition system
Type
SEI (Single Electronic Ignition)
Spark advance
Electronic
Firing order
1-4-2-5-3-6
Spark plug
Type
CY01 18 110 (AYFS 22FM)
STARTING SYSTEM
Starter
Type
Coaxial reduction
Output
(kW)
1.6
CONTROL SYSTEM
PSP switch
Type
Hydraulic pressure
CHT sensor
Type
Thermistor
MAF sensor
Type
Hot-wire
IAT sensor (Inside MAF sensor)
Type
Thermistor
TP sensor
Type
Potentiometer type
CKP sensor
Type
Pickup type
CMP sensor
Type
Pickup type
HO2S
Type
Zirconia element (Stoichiometric air/fuel ratio sensor)

*  :Fuel with a lower rating could cause the emission control system to lose effectiveness. It could also cause engine knocking and serious engine damage.

Engine oil specification

Item

Specification

Grade
API SL/SM or ILSAC GF-3/GF-4
Viscosity (SAE)
10W-30, 10W-40, 5W-20, 5W-30, 5W-40