ENGINE TUNE-UP [MZI-3.7]
id0110c5800600
Engine Tune-up Preparation
1. Verify that the selector lever is in the P position.
2. Connect the M-MDS to the DLC‐2.
ac9uuw00000115
|
3. Turn off the electrical loads.
4. Verify that no DTCs are available.
5. Warm up the engine as follows.
Ignition Timing Inspection
1. Perform “Engine Tune-up Preparation”. (See Engine Tune-up Preparation.)
2. Verify that the ignition timing (M-MDS: SPARKADV) is within the specification using M-MDS function.
3. Verify that ignition timing advances when the engine speed increases gradually.
Idle Speed Inspection
1. Perform “Engine Tune-up Preparation”. (See Engine Tune-up Preparation.)
2. Verify that the idle speed (M-MDS: RPM) is within the specification using M-MDS.
Idle Mixture Inspection
1. Perform “Engine Tune-up Preparation”. (See Engine Tune-up Preparation.)
2. Verify that the idle speed and ignition timing are within the specification. (See Ignition Timing Inspection.) (See Idle Speed Inspection.)
3. Insert an exhaust gas analyzer into the tailpipe.
4. Verify that the CO and HC concentrations are within the specified regulation.