FRONT SHOCK ABSORBER AND COIL SPRING DISASSEMBLY/ASSEMBLY

id021300800300

Warning

•  Removing/installing the piston rod nut is dangerous. The shock absorber and spring could fly off under tremendous pressure and cause serious injury or death. Secure the shock absorber in the SSTs before removing the piston rod nut.

1.  Remove the front shock absorber and coil spring. (See FRONT SHOCK ABSORBER AND COIL SPRING REMOVAL/INSTALLATION.)

2.  Disassemble in the order indicated in the table.

3.  Assemble in the reverse order of disassemble.

am8rrw00001359

1	Piston rod nut (See Piston Rod Nut Disassembly Note.)
2	Washer
3	Mounting rubber (See Mounting Rubber Assembly Note.)
4	Bearing
5	Upper spring seat (See Upper Spring Seat Assembly Note.)
6	Upper spring seat rubber
7	Dust boot
8	Bound stopper
9	Coil spring (See Coil Spring Assembly Note.)
10	Lower spring seat
11	Front shock absorber

Piston Rod Nut Disassembly Note

Warning

•  Removing the piston rod nut is dangerous. The shock absorber and spring could fly off under tremendous pressure and cause serious injury or death. Secure the shock absorber in the SSTs before removing the piston rod nut.

1.  Protect the coil spring using a piece of cloth, then set the SSTs.

2.  Compress the coil spring using the SSTs, and remove the piston rod nut.

ampjjw00000644

Coil Spring Assembly Note

1.  Compress the coil spring using the SST.

ampjjw00000536

2.  Install the shock absorber so that the lower end of the coil spring is seated on the step of the lower spring seat.

Upper Spring Seat Assembly Note

1.  Install the upper spring seat so that the notch is facing to the out side of the vehicle.

ac9wzw00000169

Mounting Rubber Assembly Note

1.  Slide the mounting rubber identification mark away from the notch of the spring seat and install.

ac9wzw00000170