4WD CONTROL MODULE REMOVAL/INSTALLATION

id031800806000

1.  For L.H.D., remove the dashboard under cover (Driver side). (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

2.  For R.H.D., remove the following parts:

(1)  Dashboard under cover (Passenger side) (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

(2)  Glove compartment service hole cover (See AIR FILTER REMOVAL/INSTALLATION.)

(3)  Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

3.  Remove in the order indicated in the table.

4.  Install in the reverse order of removal.

ac9uuw00001403

1	Bolt
2	4WD CM (See 4WD CM Removal Note.)
3	Connector

4WD CM Removal Note

1.  Push up the 4WD CM slightly, and remove it.

ac9wzw00000121