AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT [AW6AX-EL]

id0517j6800600

Warning

• A hot transaxle and ATF can cause severe burns. Turn off the engine and wait until they are cool before replacing the ATF.

1. Remove the oil dipstick.

2. Remove the oil drain plug and gasket.

ac9uuw00001946

3. Drain the ATF into a container.

4. Install a new gasket and the drain plug.

Tightening torque

23.5—54.9 N·m {2.4—5.5 kgf·m, 17.4—40.4 ft·lbf}

5. Add the specified ATF through the oil filler tube until it reaches the lower notch of dipstick.

ATF

Type: JWS3309

Capacity (Approx. quantity): 7.0 L {7.4 US qt, 6.2 lmp qt}

6. Ensure that the ATF level is in the HOT range (65 °C {149 °F}).

• Add ATF to the specified level as necessary.