DTC 58

id070200803700

DTC 58

Driver-side front air mix actuator (motor lock) (past)

POSSIBLE CAUSE

•  Driver-side front air mix actuator malfunction

•  Front A/C unit (air mix link and/or air mix crank) malfunction

•  Open or short circuit between driver-side front air mix actuator and front climate control unit

DTC 58	Driver-side front air mix actuator (motor lock) (past)
POSSIBLE CAUSE	• Driver-side front air mix actuator malfunction • Front A/C unit (air mix link and/or air mix crank) malfunction • Open or short circuit between driver-side front air mix actuator and front climate control unit

Diagnostic Procedure

STEP	INSPECTION		ACTION
1	• Disconnect the driver-side front air mix actuator connector. • Connect battery positive voltage to terminal F (or terminal G) and ground to terminal G (or terminal F) of driver-side front air mix actuator connector. • Does driver-side front air mix actuator operate?	Yes	Connect driver-side front air mix actuator connector, then go to Step 3.
1		No	Go to the next step.
2	• Remove driver-side front air mix actuator. (See FRONT AIR MIX ACTUATOR REMOVAL/INSTALLATION.) • Operate air mix link by hand. • Does air mix link operate smoothly?	Yes	Replace driver-side front air mix actuator.
2		No	Replace air mix link and/or air mix crank.
3	• Disconnect climate control unit connect (24-pin). • Connect battery positive voltage to terminal 1F (or terminal 1A) and ground to terminal 1A (or terminal 1F) of front climate control unit connector (24-pin). • Does driver-side front air mix actuator operate?	Yes	Inspect the connection of the front climate control unit connector.
3		No	Repair wiring harness.