DTC B2477 [ADVANCED KEYLESS AND START SYSTEM]
id0902e1802300
|
DTC B2477 |
Configuration error |
|---|---|
|
DETECTION CONDITION
|
Keyless control module configuration has not been performed correctly
|
|
POSSIBLE CAUSE
|
• Keyless control module configuration error
• Malfunction in the keyless control module internal circuit
|
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
PERFORM INSTRUMENT KEYLESS CONTROL MODULE CONFIGURATION
• Clear the DTC using the M-MDS.
• Perform keyless control module configuration.
• Is the DTC displayed?
|
Yes
|
Replace the keyless control module and perform the resetting procedure for the advanced keyless system when replacing the keyless control module.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY TROUBLESHOOTING OF DTC B2477 COMPLETED
• Clear the DTC from the memory.
• Is any DTC displayed?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
DTC troubleshooting completed.
|
||