SUPPLIER IDENTIFICATION PROCEDURE [AUDIO (STANDARD AUDIO)]


id0902i5803800

Note
•  The supplier can vary with the module. When asking the supplier (service center) for repair or replacement, identify the supplier and fill in the Audio Repair Order Form with the following procedures.

Identification Using the Label or Inscribed Lettering

1.  Remove the audio unit.

2.  Verify the supplier by referring to the label attached to each unit.


Identification Using the On-board Diagnostic Test Mode

1.  Start the on-board diagnostic test mode.

2.  Identify the device and supplier codes by referring to the information display.

ac9uuw00002381

Note
•  If no DTC is stored, no codes will be displayed.

Supplier code

Supplier name

1
SANYO Automedia
2
Panasonic
3
Clarion
4
Pioneer

Device code

Part name

03
CD player
09
Base unit
10
MP3 applicable CD player system
16
CAN system
17
CAN system
21
Audio panel
22
MP3 applicable CD changer
23
Audio amplifier