STARTING PROCEDURE FOR ON-BOARD DIAGNOSTIC TEST MODE [AUDIO (TOUCH PANEL TYPE AUDIO)]

id0902i6803700

Note

•  All DTCs displayed in the on-board diagnostic test mode should be entered in the Audio Repair Order Form.

1.  Turn the ignition switch to the ACC or ON position.

2.  Turn the POWER button off.

3.  While pressing the POWER button, simultaneously press the SEEK button and the MEDIA button for 2 s or more.

ac9wzw00000286

Note

•  If several DTCs are in the memory, they can be displayed using the SEEK button (up or down).

4.  To stop the on-board diagnostic test mode, turn the ignition switch off.