SUPPLIER IDENTIFICATION PROCEDURE [AUDIO (TOUCH PANEL TYPE AUDIO)]

id0902i6803800

Note

•  The supplier can vary with the module. When asking the supplier (service center) for repair or replacement, identify the supplier and fill in the Audio Repair Order Form with the following procedures.

Identification Using the Label or Inscribed Lettering

1.  Remove the audio unit.

2.  Verify the supplier by referring to the label attached to each unit.

Identification Using the On-board Diagnostic Test Mode

1.  With the audio power on, press the POWER button and simultaneously press the DISP button for approx. 2 s or more.

2.  Input diagnosis code “06” and press the ENTER button.

3.  Identify the supplier code by referring to the information display.

ac9uuw00001543

Supplier code	Supplier name
1	SANYO Automedia
2	Panasonic
3	Clarion
4	Pioneer