DTC B1014 [AUTO LIGHT/WIPER CONTROL MODULE]
id0902j1830700
|
DTC B1014 |
Rain sensor error |
|---|---|
|
DETECTION CONDITION
|
Rain sensor internal malfunction
|
|
POSSIBLE CAUSE
|
• Rain sensor malfunction
• Auto light/wiper control module malfunction
|
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
INSPECT DTC
• Clear the DTC from the auto light/wiper control module memory using the M-MDS.
• Turn the ignition switch to LOCK position.
• Turn the ignition switch to ON position.
• Is the same DTC present?
|
Yes
|
Replace the rain sensor, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY TROUBLESHOOTING COMPLETED
• Make sure to reconnect all disconnected connectors.
• Clear the DTC from the auto light/wiper control module memory using the M-MDS.
• Turn the ignition switch to LOCK position.
• Turn the ignition switch to ON position.
• Is the same DTC present?
|
Yes
|
Replace the auto light/wiper control module.
|
|
No
|
DTC troubleshooting completed.
|
||