SELF-DIAGNOSTIC [CAR-NAVIGATION SYSTEM]
id0903e8885000
Starting Procedure For Diagnostic Function
1. Turn ignition switch to ACC or ON position.
2. Launch the diagnostic mode. (See STARTING PROCEDURE FOR DIAGNOSTIC MODE [CAR-NAVIGATION SYSTEM].)
3. Select “Menu”.
am6zzw00002627
|
No. |
Display item |
Description |
---|---|---|
1
|
PKB
|
Indicates parking brake signal.
• ON: Parking brake applied.
• OFF: Parking brake released.
|
2
|
REV
|
Indicates Reverse signal state.
• ON: Reverse selected
• OFF: Reverse not selected
|
3
|
Microphone*
|
Indicates the connection state of a microphone.
• OK: Connect
• NCON: Disconnect
|
4
|
SPEED*
|
Indicates the present vehicle speed by kph/mph (a maximum of 3 digits)
|
5
|
TNS*
|
Indicates TNS signal state.
• ON: Turn TNS ON
• OFF: Turn TNS OFF
|
6
|
GPS Antenna*
|
Indicates the connection state of a GPS antenna.
• OK: Connect
• NCON: Disconnect
|
7
|
Traffic System
|
Indicates the RDS-TMC system availability on the vehicle.
• TMC: Equip
• NONE: Not equip
|
If inspecting microphone related signals:
1. Select “Navigation Check Menu”.
2. Select “Microphone Check”.
am6zzw00002628
|
No. |
Display item |
Description |
---|---|---|
1
|
PPT switch status
|
Indicates the state of a VOICE button.
<OK>: Press the button (Keep the state of until the screen is changed.)
<Please Push switch>: Other than above condition.
|
2
|
Microphone input level judging*
|
Indicates the test result.
Green indicator: The sound is inputted from the microphone properly.
Gray indicator: The sound is inputted from the microphone improperly.
|
3
|
Microphone level
|
Indicates the input level of microphone by bar graph.
|
If inspecting gyro sensor signals:
1. Select “Navigation Check Menu”.
2. Select “Vehicle Sensors”.
am6zzw00002629
|
No. |
Display item |
Description |
---|---|---|
1
|
GYRO
|
Indicates following gyro sensor signal.
• Gyro sensor signal voltage
• Relative bearing value
|