POWER LIFTGATE (PLG) TOUCH SENSOR REMOVAL/INSTALLATION


id091100803900

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Liftgate upper trim (SeeLIFTGATE UPPER TRIM REMOVAL/INSTALLATION.)
(2)  PLG arm (SeePOWER LIFTGATE (PLG) DRIVE UNIT REMOVAL/INSTALLATION.)
(3)  Liftgate side trim (SeeLIFTGATE SIDE TRIM REMOVAL/INSTALLATION.)
(4)  Liftgate lower trim (SeeLIFTGATE LOWER TRIM REMOVAL/INSTALLATION.)

3.  Disconnect the PLG touch sensor connector.

ac9uuw00000896

4.  Remove the screws.

5.  Remove the PLG touch sensor.

6.  Install in the reverse order of removal.