REAR DOOR GLASS REMOVAL/INSTALLATION

id091200800500

1.  Adjust the door glass position as shown in the figure.

ac9uuw00000410

2.  Disconnect the negative battery cable.

3.  Remove the inner sail garnish. (See INNER SAIL GARNISH REMOVAL/INSTALLATION.)

4.  Remove the rear door garnish. (See REAR DOOR GARNISH REMOVAL/INSTALLATION.)

5.  Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION.)

6.  Remove the rear door speaker. (See REAR DOOR SPEAKER REMOVAL/INSTALLATION.)

7.  Remove the bolts.

ac9uuw00002036

8.  Remove the rear door glass guide and glass run channel as a single unit.

ac9uuw00000527

9.  Remove the hole cover.

ac9uuw00002037

10.  Remove the bolt.

11.  Lift the rear door glass up and remove it in the direction of the arrow.

12.  Install in the reverse order of removal.

Note

•  When installing the rear door glass, align the glass edge with the glass run channel by hand through the speaker installation hole.