• If the following operations have been performed, initial setting is reset, and auto up/down and two-step down operation are disabled. Therefore, performing initial setting is necessary.
-
― Negative battery cable disconnected or power window system power supply fuse removed. (perform initial setting for the switches of all seats.)
― Power window switch connector disconnected. (Perform initial setting for the switch connected with the connector.)
― Prolonged open/close operation of the power window main or sub switches causes the circuit breaker to activate and automatic operation is disabled.
• The driver-side power window initialization procedure can be performed only using the power window main switch.
• The passenger-side power window initialization procedure can be performed using the power window main switch and subswitch (Passenger side).
• If the power window initialization procedure is not completed, the power window (Driver and passenger sides) does not operate automatically. Each power window can be operated only in manual operation.