HEADLIGHT BULB REMOVAL/INSTALLATION


id091800800500


Low-beam

1.  Disconnect the negative battery cable.

2.  Remove the coolant reserve tank. (RH only) (See COOLANT RESERVE TANK REMOVAL/INSTALLATION [MZI-3.7].)

3.  Remove in the order indicated in the table.

ac9uuw00000608

1
Cover
2
Connector
3
Halogen headlight bulb

Caution
•  A halogen bulb generates extremely high heat when it is illuminated. If the surface of the bulb is soiled, excessive heat will build up and the life of the bulb will be shortened. When replacing the bulb, hold the metal flange, not the glass.

4.  Install in the reverse order of removal.


High-beam

1.  Disconnect the negative battery cable.

2.  Remove in the order indicated in the table.

ac9uuw00000501

1
Cover
2
Connector
3
Headlight bulb

Caution
•  A halogen bulb generates extremely high heat when it is illuminated. If the surface of the bulb is soiled, excessive heat will build up and the life of the bulb will be shortened. When replacing the bulb, hold the metal flange, not the glass.

3.  Install in the reverse order of removal.