LICENSE PLATE LIGHT REMOVAL/INSTALLATION
id091800801100
License Plate Light
1. Disconnect the negative battery cable.
2. Remove the liftgate upper trim.(See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION.)
3. Remove the liftgate side trim.(See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION.)
4. Rmove the liftgate lower trim.(See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION.)
5. Remove in the order indicated in the table.
ac9uuw00000790
|
1
|
Connector
|
2
|
License plate light
|
3
|
Lens
|
4
|
License plate light bulb
|
6. Install in the reverse order of removal.
License Plate Light Bulb
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
ac9uuw00000691
|
1
|
Lens
(See Lens removal note.)
|
2
|
License plate light bulb
|
3. Install in the reverse order of removal.
Lens removal note
1. Insert a tape-wrapped flathead screwdriver into the service hole and pry with the screwdriver in the direction shown by the arrow to remove the lens.
ac9uuw00000692
|