WINDSHIELD WIPER MOTOR DISASSEMBLY/ASSEMBLY


id091900801000

1.  Disassemble in the order indicated in the table.

ac9uuw00002258

1
Screw
2
Windshield wiper motor
3
Wiper link No. 1
4
Wiper link No. 2
5
Main link

2.  Assemble in the reverse order of disassembly.


Ball Joint Assembly Note

1.  Use a clean rag to protect the link, and squeeze using pliers.

am8rrw00001161


Windshield Wiper Motor Assembly Note

1.  Connect the windshield wiper motor to the vehicle wiring harness connector, operate the windshield wipers, and then stop them at the auto-stop position.

2.  Adjust the motor crank and wiper link No.1 so that they are parallel as shown in the figure.

ac9uuw00000682

3.  Assemble the windshield wiper motor.