INSTRUMENT CLUSTER CONFIGURATION

id092200800300

1.  Connect the M-MDS to the DLC-2.

ac9uuw00000570

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

•  When using the IDS (laptop PC)

1.  Select “Module Programming”.

3.  Select “Programmable Module Installation”.

4.  Select “IC” and perform procedures according to directions on the M-MDS screen.

5.  Retrieve DTCs by the M-MDS, then verify that there is no DTC present.

•  If a DTC (s) is detected, perform the applicable DTC inspection. (See DTC TABLE [INSTRUMENT CLUSTER].)