•  Installed on the rear side of the WU-TWC.

ac9wzn00000598

•  A heater is built into the sensor to facilitate the activation of the HO2S at engine startup (when the exhaust gas temperature is low).

•  A zirconium element is used on the sensor. When there is a difference between the oxygen concentration inside and outside the element, electromotive force is generated by the movement of oxygen ions (inside of the zirconium element: atmosphere, outside: exhaust gas). The electromotive force changes significantly at the boundary of the stoichiometric air/fuel ratio (A/F=14.7).

•  When the temperature of the zirconium element is low, electromotive force is not generated. Therefore the HO2S is heated by a built-in heater, facilitating the oxygen sensor activation. Due to this, the sensor is efficiently activated even immediately after cold-engine startup, and a stable sensor output can be obtained.

•  The output voltage from the HO2S is used for aged deterioration determination of the catalytic converter and fuel injection control.

HO2S characteristic

ac9wzn00000701