ON-BOARD DIAGNOSTIC SYSTEM EXTERNAL TESTER COMMUNICATION FUNCTION

id040200110900

•  The external tester communication function enables communication of diagnostic data (DTC read-outs, input/output signal read-outs, and operation of input/output parts) between the dynamic stability control (DSC)/roll stability control (RSC) hydraulic unit (HU)/control module (CM) and an external tester.

Connections and Communication Contents

External tester

Mazda Modular Diagnostic System (M-MDS)

Connection

Communication method
On-board diagnostic (malfunction detection) function
Input/output: HS_CAN_H, HS_CAN_L
Serial communication
PID/DATA monitor function
Input/output: HS_CAN_H, HS_CAN_L
Serial communication
Active command modes function
Input/output: HS_CAN_H, HS_CAN_L)
Serial communication


Serial communication

•  Serial communication (two-way communication) allows for multiple data to be sent and received instantly along the same line.
•  By connecting the Mazda Modular Diagnostic System (M-MDS) to the DLC-2, diagnostic data can be sent and received between the Mazda Modular Diagnostic System (M-MDS) and the DSC/RSC HU/CM using the HS_CAN_H and HS_CAN_L terminals (within the DLC-2).
•  The DSC/RSC HU/CM receives the command signals of the malfunction detection function, parameter identification (PID)/data monitor function, and the active command modes function from the Mazda Modular Diagnostic System (M-MDS), and sends DTCs and data regarding the operating condition and status of each input/output part to the Mazda Modular Diagnostic System (M-MDS).
ac9uuw00000862

Diagnostic function name

Signal received

Signal sent
Malfunction detection function
DTC verification signal
DTC
PID/data monitor function
Command signal to read selected monitor item
Monitored data for requested monitor item
Active command modes function
Operation command signal for selected active command modes item
Input/output part name