DTC 96

id070200805100

DTC 96

Rear airflow mode actuator (motor lock) (past)

POSSIBLE CAUSE

•  Rear airflow mode actuator malfunction

•  Rear A/C unit (airflow mode links and/or airflow mode cranks) malfunction

•  Open or short circuit between rear airflow mode actuator and front climate control unit

DTC 96	Rear airflow mode actuator (motor lock) (past)
POSSIBLE CAUSE	• Rear airflow mode actuator malfunction • Rear A/C unit (airflow mode links and/or airflow mode cranks) malfunction • Open or short circuit between rear airflow mode actuator and front climate control unit

Diagnostic procedure

STEP	INSPECTION		ACTION
1	• Disconnect rear airflow mode actuator connector. • Connect battery positive voltage to terminal F (or terminal G) and ground to terminal G (or terminal F) of rear airflow mode actuator connector. • Does rear airflow mode actuator operate?	Yes	Connect rear airflow mode actuator connector, then go to Step 3.
1		No	Go to the next step.
2	• Remove rear airflow mode actuator. (See REAR AIRFLOW MODE ACTUATOR REMOVAL/INSTALLATION.) • Operate airflow mode main link by hand. • Does airflow mode main link operate smoothly?	Yes	Replace rear airflow mode actuator.
2		No	Replace airflow mode links and/or airflow mode cranks.
3	• Disconnect front climate control unit connector (24-pin). • Connect battery positive voltage to terminal 1J (or terminal 1L) and ground to terminal 1L (or terminal 1J) of front climate control unit connector (24-pin). • Does rear airflow mode actuator operate?	Yes	Inspect the connection of the front climate control unit connector.
3		No	Repair wiring harness.