REAR POWER METAL OXIDE SEMICONDUCTOR FIELD EFFECT TRANSISTOR (POWER MOS FET) REMOVAL/INSTALLATION
id074000804000
1. Disconnect the negative battery cable.
2. Remove the following parts:
- (1) Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)
- (2) Front console box mat (See FRONT CONSOLE BOX MAT REMOVAL/INSTALLATION.)
- (3) Indicator panel (See INDICATOR PANEL REMOVAL/INSTALLATION.)
- (4) Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)
- (5) Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)
- (6) Side wall (See SIDE WALL REMOVAL/INSTALLATION.)
- (7) Console panel (See CONSOLE PANEL REMOVAL/INSTALLATION.)
- (8) Console cover (See CONSOLE COVER REMOVAL/INSTALLATION.)
- (9) Console (See CONSOLE REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
|
1
|
Rear power MOS FET connector
|
|
2
|
Screw
|
|
3
|
Rear power MOS FET
|
4. Install in the reverse order of removal.
