DTC B110E, B110F, B2856, B2886, B2887

id080200811800

DTC

B110E

Driver-side side air bag sensor No.2 ID mismatch

B110F

Passenger-side side air bag sensor No.2 ID mismatch

B2856

Crash zone sensor ID mismatch

B2886

Passenger-side side air bag sensor No.1 ID mismatch

B2887

Driver-side side air bag sensor No.1 ID mismatch

DETECTION CONDITION

Warning

•  Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.

•  The SAS control module detects an error of impact magnitude set in the sensor, which occurs due to installation mismatch of the crash zone sensor or side air bag sensors.

POSSIBLE CAUSE

•  Crash zone sensor misinstalled with wrong sensor

•  Driver-side side air bag sensor No.1 misinstalled with wrong sensor

•  Passenger-side side air bag sensor No.1 misinstalled with wrong sensor

•  Driver-side side air bag sensor No.2 misinstalled with wrong sensor

•  Passenger-side side air bag sensor No.2 misinstalled with wrong sensor

DTC	B110E	Driver-side side air bag sensor No.2 ID mismatch
DETECTION CONDITION	Warning • Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. • The SAS control module detects an error of impact magnitude set in the sensor, which occurs due to installation mismatch of the crash zone sensor or side air bag sensors.
POSSIBLE CAUSE	• Crash zone sensor misinstalled with wrong sensor • Driver-side side air bag sensor No.1 misinstalled with wrong sensor • Passenger-side side air bag sensor No.1 misinstalled with wrong sensor • Driver-side side air bag sensor No.2 misinstalled with wrong sensor • Passenger-side side air bag sensor No.2 misinstalled with wrong sensor

Diagnostic procedure

STEP	INSPECTION		ACTION
1	INSPECT EACH SENSOR FOR INSTALLATION POSITION Warning • Handling the air bag system components improperly can accidentally deploy the air bag modules and pre-tensioner seat belts, which may seriously injure you. Read the service warnings and cautions before handling the air bag system components. (See AIR BAG SYSTEM SERVICE WARNINGS.) (See AIR BAG SYSTEM SERVICE CAUTIONS.) • Turn the ignition switch to the OFF position. • Disconnect the negative battery cable and wait for 1 min or more. • Verify that the crash zone sensor or side air bag sensor is installed in the correct position. • Is each sensor installed correctly?	Yes	Go to the next step.
1		No	Install the each sensor correctly, then go to the next step.
2	INSPECT SAS CONTROL MODULE • Connect the negative battery cable. • Turn the ignition switch to the ON position. • Are DTCs B110E, B110F, B2856, B2886 and/or B2887 indicated?	Yes	Replace the SAS control module. (See SAS CONTROL MODULE REMOVAL/INSTALLATION.)
2		No	DTC troubleshooting completed.

DTC	B110E	Driver-side side air bag sensor No.2 ID mismatch
	B110F	Passenger-side side air bag sensor No.2 ID mismatch
	B2856	Crash zone sensor ID mismatch
	B2886	Passenger-side side air bag sensor No.1 ID mismatch
	B2887	Driver-side side air bag sensor No.1 ID mismatch
DETECTION CONDITION		Warning • Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. • The SAS control module detects an error of impact magnitude set in the sensor, which occurs due to installation mismatch of the crash zone sensor or side air bag sensors.
POSSIBLE CAUSE		• Crash zone sensor misinstalled with wrong sensor • Driver-side side air bag sensor No.1 misinstalled with wrong sensor • Passenger-side side air bag sensor No.1 misinstalled with wrong sensor • Driver-side side air bag sensor No.2 misinstalled with wrong sensor • Passenger-side side air bag sensor No.2 misinstalled with wrong sensor