DTC INSPECTION [FORWARD SENSING CAMERA (FSC)]

id0902p9029200

1.  Connect the M-MDS to the DLC-2.

ac9uuw00000452

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

(1)  Select “Self Test”.
(2)  Select “Modules”.
(3)  Select “FSC”.

3.  Verify the DTC according to the directions on the screen.

•  If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection after recording the snapshot data.

4.  After completion of repairs, clear all DTCs stored in the forward sensing camera (FSC). (See CLEARING DTC [FORWARD SENSING CAMERA (FSC)].)


Snapshot Data

•  The data for all DTCs currently detected is stored.

—: Not applicable

Snapshot data item

Unit

Data contents

Data read/use method

Corresponding data monitor items
ECU_IN_TMP
°C
°F
ECU internal temperature
—
—
IG-ON_TIMER
hh:mm:ss
Elapsed time since ignition switch was turned to the ON position
Note
•  The instrument cluster records the elapsed time since the ignition switch was turned to the ON position.
When a DTC is detected, the forward sensing camera (FSC) receives the elapsed time since the ignition switch was turned to the ON position being detected by the instrument cluster via CAN signals and displays it in the M-MDS.
—
OPE_MODE
Normal/CALIBRATION/EMERGENCY
Operation mode
—
—
VSPD
KPH
MPH
Vehicle speed
—
VSPD